Prof.Dr.Tjokorda Gde Tirta Nindhia, ST,MT

Nama : Prof.Dr.Tjokorda Gde Tirta Nindhia, ST,MT

Tanggal Lahir : 16-01-1972

NIP : 19720116 199803 1 004

Jabatan : Guru Besar

Pangkat : Pembina

Golongan : IV/a

Scopus h-index

 

Biografi :

 

 Riwayat Pendidikan

Pendidikan

S-1 S-2

S-3

Nama Perguruan Tinggi

 Univ. Udayana

(Unud)

 Univ. Gadjah Mada

(UGM)

 Univ. Gadjah Mada

(UGM)

Bidang Ilmu  Teknik Mesin  Teknik Mesin  Teknik Mesin
Tahun Masuk – Lulus  1992-1997  1997-1999  2000-2003
Judul Skripsi/Tesis/ Disertasi Kajian opto termal kaca sebagai penutup pengumpul tenaga surya tipe pelat datar Analisis Pengaruh proses pembentukan terhadap sifat fisik dan mekanis serta perambatan retak fatik bahan perunggu keras  Peningkatan ketangguhan retak bahan tahan api berkadar alumina tinggi dengan penambahan silicon karbida whisker
Nama Pembimbing/ Promotor 1.       Ir. Budi Utomo Kukuh Widodo, M.Sc.

2.       Ir. Wayan Bandem Adnyana, Merg

 Prof. Ir. Jamasri, Ph.D

1. Prof. Dr. Ir. Ida Bagus Agra

2. Prof. Ir. Jamasri, Ph.D

PELATIHAN PROFESIONAL

Jenis Pelatihan (Dalam/Luar Negeri)

1.     Training on Cyber Factory, Yamasaki Mazak, Singapore, March 2004.

2.     Scientist exchange at Muroran Institute of Technology, Muroran, Japan, October 2004, Japan Society for Promotion of Science (JSPS) fellow.

3.     Long Term Training Program in Manufacturing, Japan International        Cooperation Agency (JICA) fellow, Toyohashi, Japan, November 2004.

4.  Training on Economic Growth and Restructuring in Postwar Japan, Tokyo, Japan March 2005.

5.    Training on sustainable agriculture, Obihiro, Japan July 2005.

6.    Training on Japan Intellectual Property System and Policy, Aichi, Japan, September 2006.

7.  Visiting researcher at Institut für Struktur-und Funktionskeramik, Montanuniversität Leoben, Austria June 2008.

8.    Workshop on Electron Microprobe Technique,  Mineralogy and Petrology Group, Mining University, Leoben, Austria, November 2008.

9.  European Young Ceramics Network Meeting, 23rd June 2009, Krakow, Poland, Held by European Ceramic Society.

10. Visiting researcher at Technical University of Vienna, Austria July 2010.

11. Visiting researcher at Institute Chemical Technology Prague, Czech Republick, Agustus-september 2012

12.Visiting researcher at at Institut für Struktur-und Funktionskeramik, Montanuniversität Leoben, Austria Agustus-September 2014

 

 

PRODUK BAHAN AJAR

Mata Kuliah Program Pendidikan Jenis Bahan Ajar (cetak dan noncetak) Sem/Tahun Akademik
Metrologi Industri S1 Teknik Mesin Cetak dan non cetak 2015
Pengecoran logam S1 Teknik Mesin Cetak dan non cetak 2015

 Pengalaman Penelitian Dalam 5 Tahun Terakhir

      No Tahun Judul penelitian Pendanaan
Sumber Jml (Juta Rp)

2010

Application of electron Microscope Austrian Federal Ministry fro Science and Research  

50

2011 Learning by doing didactic method pengujian kekuatan logam untuk meningkatkan kwalitas pembelajaran mata kuliah metalurgi Program Hibah kompetitif berbasis Institusi Universitas Udayana Kontrak: 961/UN14/PHK-I/2011 25
2012 Pemurnian Biogas dari Gas Pengotor Hidrogen Sulfida (H2S) dengan menggunakan Limbah Gram Besi Hasil Pembubutan Hibah Pengajaran Dana Dipa UNUD Kontrak: 5486/UN 14.1.31/PM/2011 10
2012 Pengembangan Teknologi dan Bahan Aktif Pembersih Biogas dari Pengotor H2S dengan Menggunakan Limbah gram Besi Hasil Pembubutan Untuk bahan Bakar Generator Listrik (tahun 1) Penelitian Strategis Nasional, Kementrian Pendidikan dan Kebudayaan.

Kontrak:013/SP2H/PL/Dit.Litbmas/III/2012

80
2012 Peningkatan Mutu Rumput Laut kering Menggunakan Pengering Tipe Kabinet DIPA PNPB Universtas Udayana 2012 50
2012  Study on Indigenous Indonesian Silkworm Cocoon as Biomaterial  Scheme of academic mobility and exchange (SAME), DIKTI, 2012 50
2013 Pengembangan Teknologi dan Bahan Aktif Pembersih Biogas dari Pengotor H2S dengan Menggunakan Limbah gram Besi Hasil Pembubutan Untuk bahan Bakar Generator Listrik (tahun 2) Penelitian Strategis Nasional, Kementrian Pendidikan dan Kebudayaan.

Kontrak No:175A.12/UN14.2/PNL.01.03.00/2013

90

2013 Perancangan Alat dan system konversi energi Biogas menjadi Energi Listrik Hibah bersaing, Dana desentralisasi DIPA Unud 2013

Kontrak no:175.31/UN14.2/PNL.01.03.00/2013

75
2014 Prototipe kendaraan pengolah sampah terintegrasi dengan centrifugal winnow dan screw crusher Ungulan perguruan tinggi 80
2014 Mechanical properties of advance ceramic Erns Mach Nachbetreuungssipendium (EZA) 50
2014 Perancangan Alat dan system konversi energi Biogas menjadi Energi Listrik Hibah bersaing, Dana desentralisasi DIPA Unud 2014

Kontrak No: 104.69/UN14.2/PNL.01.03.00/2014

75
2014 Bimbingan teknis desulfurizer dan Botling biogas Pemerintah propinsi Bali 700
2015 Prototipe kendaraan pengolah sampah terintegrasi dengan centrifugal winnow dan screw crusher Ungulan perguruan tinggi 60
2015 Perancangan Alat dan system konversi energi Biogas menjadi Energi Listrik Hibah bersaing, Dana desentralisasi DIPA Unud 2015

Kontrak No:311-69/UN14.2/PNL.01.03.00/2015

60

 

 Publikasi Artikel Ilmiah Dalam Jurnal dalam 5 Tahun Terakhir

No Judul Artikel Ilmiah Nama Jurnal Volume/ Nomor/Tahun
2 Study on Microstructure of Silicon in the Aluminium Allow of Piston Engine from Various Motor Bike Brand in Indonesia, Journal of Mechanical Engineering “Cakram”, vol. 4. No. 1,April, pp.31-34
2010
3 The Interaction of Projectile and Polymer Composite reinforced Silicon Carbide particulate and Carbon Fiber in Balistic Testing, Journal of Mechanical Engineering “Cakram”, vol. 4. No. 2,October, pp.99-105.2010
4 The Effect of  Thermal Activation on Microstructure and Porosity of Indonesian Natural Zeolite, Journal of Mechanical Engineering vol. 4. No. 2,October, pp.139-144, 2010
The relation of Microstructure and Activity of Natural Zeolite due to acidity Journal of Mechanical Engineering “Cakram”, vol. 4. No. 2,October, pp.129-131 vol. 4. No. 2,October, pp.129-131, 2010
1  Purification Biogas forms H2S impurities by utilizing Waste of Iron Chips obtained from turning process.Jurnal Energi dan manufaktur, Vol.1 No. 1, pp33-34, October  Jurnal Energi dan manufaktur  Vol.1 No. 1, pp33-34, October  2012
2  Observation on Recycle, Reuse and Reduce of Domestic Waste in The USA, Case study: Philadelphia, Journal of Wahana, Udayana University, No.77, 18, Mei, pp 24-27.  Journal of Wahana  No.77, 18,  pp 24-27.  Mei 2012
3 Pemayun, T.U.N., Nindhia, T.G.T., 2011, Teknik Membedakan Perunggu dan kuningan Pada karya Seni Logam, Jurnal Jnana Budaya, Vol.16, No.2, Hal 171-176, ISSN 1410-5195,  Akreditasi :32/Akred-LIPI/P2MBI/04/2011. Jurnal Jnana Budaya, Vol.16, No.2, Hal 171-176, ISSN 1410-5195,2011Akreditasi :32/Akred-LIPI/P2MBI/04/2011
4 Visual Aesthetic and Non Visual Aesthetic of old Chinese Coin found in Bali and Local made Chinese Coin, Journal of Bahasa dan Seni, Tahun 39,No.1, Februari 2011 (terakreditasi) Journal of Bahasa dan Seni, Tahun Tahun 39,No.1, Februari 2011 (terakreditasi)
5 Arkeometalurgi pada Enam Jenis Logam yang Berpengaruh pada Peradaban Umat Manusia, Jurnal Masyarakat, Kebudayaan dan Politik, Volume 24,Nomor 1,Januari-Maret 2011, Hal: 1-5, ISSN: 2086-7050 Jurnal Masyarakat, Kebudayaan dan Politik Vol.24, No.1, January- March, pp. 1-5. (terakreditasi),
6 Processing of Steel Chips Waste for Regenerative Type of Biogas Desulfurizer, International Journal of Renewable Energi and Research Vol.3, No.1, January 2013, ISSN: 1309-0127Journal International
Table Type Sun Drying for Seaweed preservation, Journal of Applied Mechanics and material, Vol. 376, 2013, pp.34-37, doi:10.4028, indexed: Scopus Vol. 376, 2013, pp.34-37, doi:10.4028, indexed: Scopus Journal International
On  Investigation of Metals Composition in Old Chinese Coin from the Northern Song Dynasty Found in Bali Island Indonesia, International Journal of Social Science and Humanity, Vol. 4, No. 1, Vol. 4, No. 1,January 2014, pp.40-41, ISSN: 2010-3646Journal International
7 Method on Conversion of Gasoline to Biogas Fueled Single Cylinder of Four Stroke Engine of Electric International Journal of Environmetal Science and Development, Vol. 4, No. 3, June  2013.Journal International
Tensile Properties and Biocompatibility of Indonesian Wild Silk Cricula trifenestrata: a Preliminary Study , Journal of Medical and Bioengineering, Journal of Medical and Bioengineering, Vol.3, No.2, June 2014, pp.140-143, ISSN:2301-3796Journal International
To Recycle Zinc (Zn) from Used Zinc –Carbon Battery as Biogas Desulfurizer, International Journal of Material Science and Engineering, Vol.2, No. 1 June 2014 International Journal of Material Science and Engineering, Vol.2, No. 1 June 2014Journal International
Design on Direct Crushing Garbage in the Garbage Dump Truck: A Case Study for Denpasar City, Bali, Indonesia, International Journal of Material, Mechanic and Manufacturing (IJMMM), vol.3, No.2, May 2015, pp.101-104,Journal International
Simple Conversion Method from Gasoline to Biogas Fueled Small engine to Powered Electric Benerator, Energy Procedia, 52 (2014)626-632, www.sciendirect.com, ISSN 1876-6102, indexed: Scopus,Journal International
Biogas Desulfurizer Made from Waste of Aluminium Chips, International Journal of Mechanic and Manufacturing, Vol. 2, No. 3, August 2014, pp. 219-222 International Journal of Mechanic and Manufacturing, Vol. 2, No. 3, August 2014, pp. 219-222 Vol. 2, No. 3, August 2014, pp. 219-222Journal International
Processing Carbon Rod from Waste of Zing-Carbon Battery for Biogas Desulfurizer, Journal of Clean Energy Technologies, Vol. 3, No. 2, March 2015, pp.119-122 Journal of Clean Energy Technologies, Vol. 3, No. 2, March 2015, pp.119-122 Vol. 3, No. 2, March 2015, pp.119-122Journal International
Design on Direct Crushing Garbage in the Garbage Dump Truck: A Case Study for Denpasar City, Bali, Indonesia, International Journal of Material, Mechanic and Manufacturing (IJMMM), vol.3, No.2, May 2015, pp.101-104, vol.3, No.2, May 2015, pp.101-104 Journal International,
Wear of Carbon Steel (0.65%C) in Rolling-Sliding Contact with Creep Ratio, International Journal Journal:Applied Mechanics and Material, Vol.776 (2015)pp 229-232, May 2015, indexed:scopus
New Route in Degumming of Bombyx mory Silkworm Cocon for Biomaterial, Vol.4, No.4, August 2015, pp.338-341. Journal of Medical and Bioengineering,Journal of Medical and Bioengineering, Vol.4, No.4, August 2015, pp.338-341.Journal International

.

Pemakalah Seminar Ilmiah (Oral Presentation) dalam 5 Tahun Terakhir

No. Nama Pertemuan Ilmiah/ Seminar Judul Artikel Ilmiah Waktu dan Tempat

National conference on science and Technology (SENASTEK) 2014,

Processing of Bombyx mori silkworm cocoon as biocombatible membrane, National conference on science and Technology (SENASTEK) 2014 18-19 September 2014/Bali

 

National conference on science and Technology (SENASTEK) 2014/Bali

Biogas powered electric generation

18-19 September 2014/Bali

 

National conference on science and Technology (SENASTEK) 2014, 18-19 September 2014,pp.451-457

Analises on Skid and Rolling on Garbich Waste Vehicle,

18-19 September 2014,/Bali

 

International conference on biological and medical science  

New Route in Degumming of Bombyx mory Silkworm Cocon for Biomaterial

 

27-28 september 2014
International conference on envnromental engineering and development Processing Carbon Rod from Waste of Zing-Carbon Battery for Biogas Desulfurizer

 

27-28 May, Sydney, australia
International conference on manufacturing and industrial engineering Biogas Desulfurizer Made from Waste of

Aluminium Chips

 

Maret 22-23 -2014, Bali
International conference on manufacturing and industrial engineering To Recycle Zinc (Zn) from Used Zinc-Carbon Battery as Biogas Desulfurizer

 

Maret 22-23 -2014, Bali
International conference on medical environmental and biotechnology Tensile Properties and Biocompatibility of Indonesian Wild Silk Cricula trifenestrata:          a Preliminary Study

 

5-6 Oktober 2013, Malaca, malaysia
International conference on alternative energy Simple Conversion Method from Gasoline to Biogas Fueled Small Engine  To Powered Electric Generator

 

30-31 mei 2013, Bangkok Thailand
International Conference on environmental science and engineering Method on Conversion of Gasoline to Biogas Fueled Single Cylinder of Four Stroke Engine of Electric Generator 21-22 April 2013/Beijing China

Proceeding of national conference on Machine and Industry (SNMI VIII) 14 November 2013, Jakarta, Indonesia,

Wear resistance of surface hardened Carbon steel AISI 1065 to rolling sliding load 14 November 2013, Jakarta, Indonesia,

, Proceeding of national conference on Machine and Industry (SNMI VIII) 14 November 2013, Jakarta, Indonesia,

Strain hardening of Carbon steel  AISI 1065 due to rolling-sliding load 14 November 2013, Jakarta, Indonesia,

Proseing of Global Engineering science and Technology Conference, ISBN:978-1-922069-32-0,

Effectiveness of Magnesium (Mg) as Sacrifice Anode for Low Carbon Steel in Urea Reach Environment, 3-4 October 2013, Bay View Hotel Singapore

Proceeding of International conference of annual meeting of Indonesia mechaninchal engineering association XII

On Preparation of Advance Ceramic for Single-edge V-Notch Beam Fracture Toughness Test of ISO/FDIS 23146:2008(E) Standard, Lampung, Indonesia, 22-23 October 2013,
1

 Proceeding of the 2nd International Conference on Sustainable Technology Development ICSTD,

 Comparison Vickers Hardness of Welding Aluminium MG5083 with Welded for Metal Inert Gas (MIG) and Tungsten Inert Gas (TIO), October 32st 2012, Bali, ISBN 978-602-7776-06-7, udayana university press
2

 Proceeding of the 2nd International Conference on Sustainable Technology Development ICSTD,

 Performance of Diamaond Cutting Tools in the Turining Proses of Stainless Steel, Copper and alluminium,  October 32st 2012, Bali, ISBN 978-602-7776-06-7, udayana university press, PP. M31-M42
3  Proceeding od the 2nd International Conference on Sustainable Technology Development ICSTD,  Quality Improvement of Dried Seaweed by using Cabinet Dryer,

 October 32st 2012, Bali, ISBN 978-602-7776-06-7, udayana university press, pp. M129-M135

 

4

 Proceeding od the 2nd International Conference on Sustainable Technology Development ICSTD,

 Performance of Repetitive Type of Biogas Desulfurizer Made from Steel Chips Waste, October 31st 2012, Bali, ISBN 978-602-7776-06-7, udayana university press. Pp M63-M69
5

 Proceeding Seminar Tahunan Teknik mesin XI (SNTTM XI)& Thermofluid IV,.

 Tingkat Keausan Baja Karbon (AISI 1065) Akiba Beban Kontak Gelinding-luncur (Wear Rate of Carbon Steel (AISI 1065) due to Loading of Rolling-sliding contact, Universitas Gadjah Mada (UGM) Yogyakarta, 16-17 Oktober 2012
6

 Proceeding Seminar Tahunan Teknik mesin XI (SNTTM XI)& Thermofluid IV,

 Morphology, Chemical Elements Composition, and Biocompatibility of Indonesia Wildsilkworm Cocoon Universitas Gadjah Mada (UGM) Yogyakarta, 16-17 Oktober 2012
7

 The 3rd Conference of National Hotel Enginering,6-7 July, 2012  Bali, Indonesia

 Method of Recoating of  Sanitary by Utilizing electroplating,

 6-7 July, 2012  Bali, Indonesia

 

8

THE TWENTY-SEVENTH INTERNATIONAL CONFERENCE ON SOLID WASTE TECHNOLOGY AND

Removal of Hydrogen Sulfide (H2S) contaminant in Biogas by Utilizing Solid Waste Steel Chips from The Process of Turning, Philadelphia, PA U.S.A. March 11-14, 2012
9

Proceeding of The 2nd International conference sustainable technology development, 4-5 Oktober ,Bali, Indonesia

Performance of Repetitive type of Biogas Desulfurizer Made from Steel Chips Waste,

4-5 Oktober ,Bali, Indonesia, 2012

 

10

Proceeding of National Conference on Hotel Engineering II, 10th September,  Bali, Indonesia,

The Comparison of Tip Geometry  of cutting tools made by High Speed Steel, Boron Carbide and Diamond

10th September,  Bali, Indonesia,

2011

11 Proceeding of National Conference on Hotel Engineering II Low Cost Bullet Proof Body Armor for Security Guard Personnel, September,  Bali, Indonesia,, 2011
12

Proceeding of The 1st International Conference on Sustainable Technology Development

 Ability of Advanced Ceramic Silicon Nitride (Si3N4) as a Bearing Material for Wind Turbine of Wind Energy,

 

Bali, Indonesia, 7-8 October 2010.

 

13

Proceeding of Mechanical Engineering Annual Conference IX,

 Fracture Toughness of Silicon Nitride Measured by The Surface Crack in Flexure (SCF) Test Method (Result Obtained by using Short Speciment: 3 x 4 > 25 mm),

 

13-15 October, pp. MIV 75-MIV79., 2010

 

14

 National Conference on Hotel Engineering,

,  First Study on Polymer-Carbon Fiber- Silicon Carbide  Composite for Bulletproof Body Armor,  National Conference on Hotel Engineering,

 

22nd July 2010, Sanur, Bali, Indonesia,

 

15 ,  National Conference on Hotel Engineering,

 

The Development of Polymer Composite Reinfored Silicon Carbide Particulate (SiCp) for Bulletproof Body Armor,

 

22nd July 2010, Sanur, Bali, Indonesia,

 

16

National Conference on Hotel Engineering,

The Effect of Thermal Activation on Microstructure of natural Zeolite. National Conference on Hotel Engineering,

 

22nd July 2010, Sanur, Bali, Indonesia,

 

17 Conference on Hotel Engineering, The Microstructure  of  Natural  Zeolite activated by Sulfuric Acid, , 22nd July 2010, Sanur, Bali, Indonesia
18

The Natioanal conference on Mechanical Engineering, 25 May 2010,  Lombok, Indonesia,

The Progress of Ceramography on Silicon Nitride, Natioanl conference on Mechanical Engineering

 

25 May 2010,  Lombok, Indonesia,

 Pemakalah Seminar Ilmiah (Oral Presentation) dalam 5 Tahun Terakhir

No. Nama Pertemuan Ilmiah/ Seminar Judul Artikel Ilmiah Waktu dan Tempat

National conference on science and Technology (SENASTEK) 2014,

Processing of Bombyx mori silkworm cocoon as biocombatible membrane, National conference on science and Technology (SENASTEK) 2014

18-19 September 2014/Bali

 

National conference on science and Technology (SENASTEK) 2014/Bali

Biogas powered electric generation

18-19 September 2014/Bali

 

National conference on science and Technology (SENASTEK) 2014, 18-19 September 2014,pp.451-457

Analises on Skid and Rolling on Garbich Waste Vehicle,

18-19 September 2014,/Bali

 

International conference on biological and medical science  

New Route in Degumming of Bombyx mory Silkworm Cocon for Biomaterial

 

27-28 september 2014
International conference on envnromental engineering and development Processing Carbon Rod from Waste of Zing-Carbon Battery for Biogas Desulfurizer

 

27-28 May, Sydney, australia
International conference on manufacturing and industrial engineering Biogas Desulfurizer Made from Waste of

Aluminium Chips

 

Maret 22-23 -2014, Bali
International conference on manufacturing and industrial engineering To Recycle Zinc (Zn) from Used Zinc-Carbon Battery as Biogas Desulfurizer

 

Maret 22-23 -2014, Bali
International conference on medical environmental and biotechnology Tensile Properties and Biocompatibility of Indonesian Wild Silk Cricula trifenestrata:          a Preliminary Study

 

5-6 Oktober 2013, Malaca, malaysia
International conference on alternative energy Simple Conversion Method from Gasoline to Biogas Fueled Small Engine  To Powered Electric Generator

 

30-31 mei 2013, Bangkok Thailand
International Conference on environmental science and engineering Method on Conversion of Gasoline to Biogas Fueled Single Cylinder of Four Stroke Engine of Electric Generator 21-22 April 2013/Beijing China

Proceeding of national conference on Machine and Industry (SNMI VIII) 14 November 2013, Jakarta, Indonesia,

Wear resistance of surface hardened Carbon steel AISI 1065 to rolling sliding load 14 November 2013, Jakarta, Indonesia,
, Proceeding of national conference on Machine and Industry (SNMI VIII) 14 November 2013, Jakarta, Indonesia,

 

Strain hardening of Carbon steel  AISI 1065 due to rolling-sliding load 14 November 2013, Jakarta, Indonesia,

Proseing of Global Engineering science and Technology Conference, ISBN:978-1-922069-32-0,

Effectiveness of Magnesium (Mg) as Sacrifice Anode for Low Carbon Steel in Urea Reach Environment, 3-4 October 2013, Bay View Hotel Singapore

Proceeding of International conference of annual meeting of Indonesia mechaninchal engineering association XII

On Preparation of Advance Ceramic for Single-edge V-Notch Beam Fracture Toughness Test of ISO/FDIS 23146:2008(E) Standard, Lampung, Indonesia, 22-23 October 2013,
1

 Proceeding of the 2nd International Conference on Sustainable Technology Development ICSTD,

 Comparison Vickers Hardness of Welding Aluminium MG5083 with Welded for Metal Inert Gas (MIG) and Tungsten Inert Gas (TIO), October 32st 2012, Bali, ISBN 978-602-7776-06-7, udayana university press
2

 Proceeding of the 2nd International Conference on Sustainable Technology Development ICSTD,

 Performance of Diamaond Cutting Tools in the Turining Proses of Stainless Steel, Copper and alluminium,  October 32st 2012, Bali, ISBN 978-602-7776-06-7, udayana university press, PP. M31-M42
3  Proceeding od the 2nd International Conference on Sustainable Technology Development ICSTD,  Quality Improvement of Dried Seaweed by using Cabinet Dryer,

 October 32st 2012, Bali, ISBN 978-602-7776-06-7, udayana university press, pp. M129-M135

 

4

 Proceeding od the 2nd International Conference on Sustainable Technology Development ICSTD,

 Performance of Repetitive Type of Biogas Desulfurizer Made from Steel Chips Waste, October 31st 2012, Bali, ISBN 978-602-7776-06-7, udayana university press. Pp M63-M69
5

 Proceeding Seminar Tahunan Teknik mesin XI (SNTTM XI)& Thermofluid IV,.

 Tingkat Keausan Baja Karbon (AISI 1065) Akiba Beban Kontak Gelinding-luncur (Wear Rate of Carbon Steel (AISI 1065) due to Loading of Rolling-sliding contact, Universitas Gadjah Mada (UGM) Yogyakarta, 16-17 Oktober 2012
6

 Proceeding Seminar Tahunan Teknik mesin XI (SNTTM XI)& Thermofluid IV,

 Morphology, Chemical Elements Composition, and Biocompatibility of Indonesia Wildsilkworm Cocoon Universitas Gadjah Mada (UGM) Yogyakarta, 16-17 Oktober 2012
7

 The 3rd Conference of National Hotel Enginering,6-7 July, 2012  Bali, Indonesia

 Method of Recoating of  Sanitary by Utilizing electroplating,

 6-7 July, 2012  Bali, Indonesia

 

8

THE TWENTY-SEVENTH INTERNATIONAL CONFERENCE ON SOLID WASTE TECHNOLOGY AND

Removal of Hydrogen Sulfide (H2S) contaminant in Biogas by Utilizing Solid Waste Steel Chips from The Process of Turning, Philadelphia, PA U.S.A. March 11-14, 2012
9

Proceeding of The 2nd International conference sustainable technology development, 4-5 Oktober ,Bali, Indonesia

Performance of Repetitive type of Biogas Desulfurizer Made from Steel Chips Waste,

4-5 Oktober ,Bali, Indonesia, 2012

 

10

Proceeding of National Conference on Hotel Engineering II, 10th September,  Bali, Indonesia,

The Comparison of Tip Geometry  of cutting tools made by High Speed Steel, Boron Carbide and Diamond

10th September,  Bali, Indonesia,

2011

11 Proceeding of National Conference on Hotel Engineering II Low Cost Bullet Proof Body Armor for Security Guard Personnel, September,  Bali, Indonesia,, 2011
12

Proceeding of The 1st International Conference on Sustainable Technology Development

 Ability of Advanced Ceramic Silicon Nitride (Si3N4) as a Bearing Material for Wind Turbine of Wind Energy,

 

Bali, Indonesia, 7-8 October 2010.

 

13

Proceeding of Mechanical Engineering Annual Conference IX,

 Fracture Toughness of Silicon Nitride Measured by The Surface Crack in Flexure (SCF) Test Method (Result Obtained by using Short Speciment: 3 x 4 > 25 mm),

 

13-15 October, pp. MIV 75-MIV79., 2010

 

14

 National Conference on Hotel Engineering,

,  First Study on Polymer-Carbon Fiber- Silicon Carbide  Composite for Bulletproof Body Armor,  National Conference on Hotel Engineering,

 

22nd July 2010, Sanur, Bali, Indonesia,

 

15

,  National Conference on Hotel Engineering,

The Development of Polymer Composite Reinfored Silicon Carbide Particulate (SiCp) for Bulletproof Body Armor,

 

22nd July 2010, Sanur, Bali, Indonesia,

 

16

National Conference on Hotel Engineering,

The Effect of Thermal Activation on Microstructure of natural Zeolite. National Conference on Hotel Engineering,

 

22nd July 2010, Sanur, Bali, Indonesia,

 

17 Conference on Hotel Engineering, The Microstructure  of  Natural  Zeolite activated by Sulfuric Acid, , 22nd July 2010, Sanur, Bali, Indonesia
18

The Natioanal conference on Mechanical Engineering, 25 May 2010,  Lombok, Indonesia,

The Progress of Ceramography on Silicon Nitride, Natioanl conference on Mechanical Engineering

 

25 May 2010,  Lombok, Indonesia,

 Pengalaman Pengabdian Kepada Masyarakat 5 Tahun Terakhir

No Tahun Judul pengabdian kepada masyarakat Pendanaan
Sumber Jml (Juta Rp)

1

 2010  Tim Teknik Pura di Mengwi  Fak. Teknik, Univ. Udayana
2  2010  Tim Teknik Air Bersih di Bontihing  Fak. Teknik, Univ Udayana
2 2010 Peleburan logam, 2010, Klungkung

 

Univ. Udayana
3 2010 Pasir cetak Pengecoran Univ. Udayana
4 2010 Pengikat bentonit pasir cetak Univ. Udayana
Kebersihan di tampak siring Univ. Udayana
Bakti ilmiah teknik Fak. Teknik, Univ. Udayana
2011 Elektroplating Nikel, kamasan, Klungkung, Bali Dana PNPB DIPA Unud, No. 1685.b.77/UN.14/KU.03.04/Perjanjian/2011 4
2012 Elektroplating Perak, kamasan Klungkung, Bali

 

Dana PNPB DIPA Unud No. 15.100/UN.14/LPPM/Kontrak 2012 4
2012 Pelatihan Teknologi Informasi Untuk mendukung Proses Belajar mengajar Bagi Guru Sekolah Dasar Sekecamatan Nusa Penida LPPM Unud 4
2012 Pengabdian di desa Sobangan, mengwi Fakultas teknik Unud
 2012  Pengabdian di Desa Serangan , Denpasar selatan.  Fakultas teknik Unud  –
2013 Ibm Kelompok ternak Penghasil pupuk organic dan kelompok tani pembibitan cabai di desa kelating Kecamatan kerambitan kabupaten tabanan propinsi Bali Ibm, Dikti 30
2013 Ibm Kacang asin Ibm, Dikti 50
2014 Ibm Usaha Kecil Susu Kedelai Ibm, Dikti 50
2014 Pelatihan teknik Pembuatan dan pemanfaatan biogas di des aped nusa penida DIPA UNUD 5
2015 Pemberdayaan masyarakat melalui pengembangan kelompok usaha tani di desa ped kecamatan Nusa Penida kabupaten Klungkung Hibah KKN PPM

anggota

 JABATAN DALAM PENGELOLAAN INSTITUSI

Peran/Jabatan Institusi(univ, Fax, Jurusan, Lab, Studio, Manajemen Sistem Informasi Akademik, dll) Tahun … s.d.  …

Ketua Editor

Jurnal Energi dan Manufaktur 2010-2015
Ketua penilai angka kredit fakultas Fakultas Teknik 2013-2018
Sek Senat  fak teknik Faakultas teknik

2008-2009

2010-2015

Penghargaan dalam 10 tahun Terakhir (dari pemerintah, asosiasi atau institusi lainnya)

No. Jenis Penghargaan Institusi Pemberi Penghargaan Tahun

1

Peneliti Terbaik I Fakultas Teknik universitas Udayana Fakultas Teknik Universtas Udayana 2012
2 Peneliti Senior Terbaik I Univ Udayana Univ udayana 2012
3 Dosen berprestasi No 1 (terbaik) univ Udayana Univ Udayana 2013
4 Finalis Dosen berprestasi Tingkat Nasional Kementrian Pendidikan dan Kebudayaan Rep. Indonesia 2013
5 Awarded as best paper award on  2014 International Conference on Biomedical and Pharmaceutical Engineering (ICBPE 2014) Sydney, Australia, May 27-28, 2014, www.icbpe.org/best.html, ICBPE 2014
6 Satya Lencana Karya Satya 10 Tahun Presiden Republik Indonesia

2014

 ORGANISASI PROFESI/ILMIAH

Tahun Jenis/ Nama Organisasi Jabatan/jenjang keanggotaan

2008

Masyarakat nano Indonesia member
2012 Chemical biology environmental engineering  CBEES member
2015 International association computer science information and technology IACSIT

member


Kategori